mold growing in your home or business? give us a call!

Dallas Mold Remediation

Mold and mildew thrive and grow in warm and damp areas that are prevalent throughout homes and businesses in the Greater Dallas area. If given the opportunity to grow, mold could cause severe damage to your home or business. Not only can it destroy your building, but mold can also pose a serious health risk to anyone and everyone inside.  While mold can be caused my water damage, it can also be caused by poor air flow allowing moisture to become trapped. 

If you are looking for mold removal for your home or business in North Texas, North Texas Mold Removal will work with you to remove any and all mold problems while helping to restore anything that may have been damaged in the process. North Texas Mold Removal will come out and perform a mold assessment offers total mold remediation by cleaning up mold and helping to create a healthier atmosphere and improving the air quality in your home or business! 

Breathe Easier As soon as we leave!

When left untreated, mold will grow at an exponential rate. When you notice (or suspect) mold, please do not try and clean it up yourself as it is not only hazardous, but many of the remedies that you find online have been proven ineffective, and can sometimes even lead to bigger problems.  Book a call to get us out there today!

dallas mold removal service area

In addition to all of the largest cities in the Dallas-Fort Worth Metroplex, we also service over 50 additional cities, towns, and communities. If you don’t see your city listed on our Service Area page, please give us a call at (469) 806-0700 because if we can’t get to you, we can put you in touch with one of our trusted service providers in your area.

Mold Removal Highland Park, Mold Removal University Park, Cole Mold Removal, Highland Mold Removal, Mold Removal Duncanville, Mold Removal Farmers Branch, Balch Springs Mold Removal, Mold Removal Grand Prairie, Mold Removal Buckingham, Mesquite Mold Removal

Mold Removal Questions and Answers

Mold can be found anywhere. It’ll sometimes hide in probably the most unexpected places. Having said that, mold can only just grow in areas where there’s humidity. Here is a list of places to look if you suspect that you will find mold in your home.

  1. Chimneys – The spaces between the bricks collect water and grime. This makes it a great place for mold to hide out. To eliminate the mold, change any rusted caps and contact a chimney sweep. They will be able to get the mold out of the chimney and they’ll also get any harmful creosote. This will help your chimney to work properly.
  2. Refrigerator Drip Pans – Underneath your refrigerator you’ll get a lot of humidity from spills and from condensation. This makes it a prime place for mold to collect and grow. To eliminate the mold, apply the pan with hydrogen peroxide. Then, wipe the pan clean with white vinegar. For best results, clean the floor underneath the fridge too.
  3. Front Loading Washers – The entrance-way of a front loading washer will get moist when in use. When it’s not in use and the door is closed, mold can and will collect on the door. To eliminate the mold, wipe the door and gasket before closing. If you notice mold collecting, run some warm water with chlorine bleach. The blend should kill any mold which has collected.
  4. Window Seals – Condensation gathers there sufficient reason for the combination of water and grime, the windows are a excellent place for mold to multiply and grow. To remove, open up the window after a heavy rain. Clean the moisture from your windows. When the seals between the windows are failing, replace them. Cleaning your window frequently will avoid the growth of mold.
  5. Dishes – When you stack dishes that are still wet, it offers the perfect atmosphere for mold to grow. To eliminate the mold, place the dishes inside a dishwasher. You should wipe the cupboards with some vinegar to kill any mold which may be gathering there as well. When done cleaning the dishes, dry them completely before storing.
  6. Air Conditioners – When running, these trap grime and dust and then collect moisture from your air. This gives food and humidity for mold to grow. To eliminate the mold from your own AC, take away the front plate and use a HEPA vacuum to eliminate the mold. Then, clean the drain pan with bleach and water.
  7. Bathroom Bathtub – After taking a shower or bath, humidity has collected on the sides of the bathtub. This makes it a perfect place for mold to collect and grow. To eliminate, mix bleach and water inside a spray bottle and spray it onto the impacted area. Wipe off after a couple minutes.

If you believe you might have smelled mold in your home or if you suspect it might be in your home, these are good places to look. Mold can hide anywhere, rendering it difficult to find. But remember that mold can only grow where there is moisture for it to grow. If mold is found, take it off as soon as possible.

If you suspect that you might have mold in your home, it’s important that you have a mold inspection. Mold can cause sickness in people, so it is important that you get the problem fixed. To completely inspect your house for mold, you should know where to look. Just follow these tips.

How to locate Mold

  1. Check places which are full of humidity. For mold to grow it needs humidity, so this ought to be the very first places you search for mold. Be sure you look in locations such as for example under your sinks and in the basement.
  2. Check for places that have recently been damaged with water. Have you recently acquired any floods? If so, check the location of the flood. Check your water pipes too. Perhaps you have recently acquired a water pipe burst? When the water had not been cleaned up properly, which is where you might have a mold problem.
  3. Examine your ceilings and walls cavities. The spacing between the walls are a excellent place for mold to hide, especially since they are covered off and trap moisture. Occasionally piping may drip, as well, which will include more moisture between your walls. Mold developing in these areas will continue steadily to spread so it is particularly important that you find it before it begins to become visible.
  4. Check your shower curtains. When you shower, dirt and shampoo mix, and leave a residue behind that is a perfect place for mold to grow. Unless you wipe down your shower curtain after each shower, you will see extra moisture that will allow for mold to grow.
  5. Check your home air ducts. If your home has central cooling or central heating, your vents will experience fluctuations in humidity. Due to the blend between very hot and cool, moisture tends to collect on and in the drain pans. The vents will then become a perfect location for mold to grow.

How to Look for Mold

  1. Make use of an in-home mold examining kit. The mold examining products come with their own examining instruments. Whatever you must do is follow the guidelines given. However, remember that these products are hard to use and the results can frequently be unreliable.
  2. Hire a professional mold inspector. A professional will have a number of various instruments and devices used for detecting mold. Before hiring a professional, check with your state’s contractor-licensing board to ensure that they are certified to remove mold.
  3. Check the contaminated area usually after washing. If there was mold underneath your bathrooms sink, be sure area regularly. If you discover that the mold has reappeared following the washing, the washing was not efficient, and you have to get that area cleaned out again.

Inspecting your house for mold is particularly important. You need to know where to look, and ways to get rid of mold if you discover it. Leaving behind the mold where you find it could potentially put someone’s life at risk when the mold problem isn’t fixed immediately.

Did you know that some mold could be more poisonous for you and your body than pesticides? It’s been shown that a large number of houses have mold in them; up to 25%. Everyone is at an increased risk for mold poisoning. It doesn’t matter your actual age, gender, or the climate you live in – mold could be there.

Mold causes a couple of different medical issues. It can even be deadly, despite what some people say. Some individuals aren’t as delicate to mold as others are usually, but mold will cause medical issues. Some of these include:

  1. Rash – Some individuals are sensitive to mold which can then cause a rash to seem on their body. In severe situations, mold can cause inflammation inside your throat. It is not rare for mold to create rashes and hives show up.
  2. Coughing – Mold spores have become light and travel by air. It’s very easy for mold spores to be inhaled. When they are usually inhaled, it generates irritation in the liner of your throat, causing you to cough.
  3. Throat Irritation – If you are allergic to mold, a tender throat can be your body’s method of defending itself from your allergen. Your immune system sees the mold as a danger as well as your throat can inflame in response. Inhaling the mold spores may also cause a tender throat. The mold spores can cause irritation inside your throat, lungs, and airways.
  4. Asthma – Mold doesn’t always trigger asthma, but mold may bring on asthma assaults in people with asthma. When subjected to mold, the person’s symptoms will get worse. You may experience more asthma assaults, a very restricted chest, as well as the assaults will seem much longer than usual.
  5. Fatigue – Exposure to mold can make it tough to breathe for people who have pneumonia or additional respiratory problems. The issue in breathing could make you feel exhausted.

Some of these symptoms are very common if you’ve been subjected to mold. Others tend to be more rare. A lot of people who have experienced an contact with mold get a rash, coughing, or a tender throat. It’s very common for those who have asthma to have an increase in asthma assaults. It’s much less common though for you to feel tired.

If you’ve been subjected to mold and so are experiencing any persistent symptoms, as well as if any of your symptoms are not listed here, you need to go see a doctor. You will need immediate treatment as well as the quick eradication of the mold. It is vital that you listen to what your physician tells you to do. People have died from an excessive amount of exposure to mold.

Mold allergies vary in every person. Some individuals may possibly not be impacted whatsoever. Others may experience year-round symptoms due to mold, or they may only experience discomfort during certain times of the entire year. Usually those symptoms will occur within the wetter months.

In conclusion, depending on the type of mold, it could be harmful to people of all ages. If you believe that any of your symptoms are due to mold you’ve are exposed to, alert your physician.

severe mold damage
mold damaged walls
molded fabric

Schedule Your Dallas Mold Removal Today and we will get someone out immediately, 24-hours a day, 7-days a week!